Features
- Adjustable transimpedance gain from 102 to 108 V/A
- Wide bandwidth up to 200 MHz
- Various Si and InGaAs models cover the 320 to 1700 nm wavelength range
- High dynamic input range up to 10 mW optical power
- Large optical detector size up to 3 mm dia.
- Very low noise, NEP down to 47 fW/√Hz
- Switchable low pass filters for minimising wideband noise
- Fibre optic and free space input
- 1.035″-40 threaded free space input compatible with many optical standard accessories
- Full manual and remote control capability
| Model | OE-300-SI-10-FST | OE-300-SI-30-FST | OE-300-IN-01-FC | OE-300-IN-03-FST |
|---|---|---|---|---|
| Detector Type | Si-PIN | Si-PIN | InGaAs PIN | InGaAs PIN |
| Detector Size [mm] | 1.0 x 1.0 | Ø 3.0 | Ø 0.08 | Ø 0.3 |
| Spectral Range [nm] | 400 - 1000 | 320 - 1000 | 900 - 1700 | 800 - 1700 |
| NEP (Dependent on Gain Setting) [/√Hz] | 76 fW - 322 pW | 81 fW - 325 pW | 47 fW - 180 pW | 52 fW - 192 pW |
| Datasheet |  |
|
|
|
The following characteristics are valid for all models:
| Performance Range | Low Noise | High Speed | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Amplification [V/A] (transimpedance) | 102 | 103 | 104 | 105 | 106 | 107 | 103 | 104 | 105 | 106 | 107 | 108 |
| Bandwidth (-3 dB) [MHz] | 200 (100)1 | 80 (60)1 | 14 | 3.5 | 1.8 | 0.22 | 175 (100)1 | 80 (60)1 | 14 | 3.5 | 1.8 | 0.22 |
| Accuracy Performance | ±1 % (transimpedance) | |||||||||||
| Low Pass Filter | switchable to 1 MHz and 10 MHz | |||||||||||
| Output | ±1 V (@ 50 Ω load), for linear amplification | |||||||||||
| Power Requirements | ±15 V, +150 mA/−100 mA typ., ±200 mA recommended | |||||||||||
| Control Interface | 5 opto-isolated digital inputs, TTL/CMOS compatible, analog offset control voltage input | |||||||||||
| Case | 170 x 60 x 45 mm (L x W x H), Weight 320 g (0.74 lb.) | |||||||||||
1) model OE-300-SI-30
Offset adjustable by trimpot or external control voltage. LED overload indication. Output short-circuit protected. Power supply via 3-pin Lemo® socket. A mating connector is provided with the device. Optional power supply PS-15 available. For further information please view the datasheet or contact FEMTO.
State-of-the-art photodetection in MHz range
The OE-300 photoreceiver consists of a premium quality photodiode followed by a high-end, variable gain transimpedance amplifier. The low noise performance (NEP) is outstanding and sets a benchmark for wideband photoreceivers particularly in the high and mid-range gain settings. The relatively large sized detectors make optical alignment easy and also ensure a very high coupling efficiency when using the Si models together with the optionally available fibre optic adapters PRA-FC/SMA.
The switchable gain from 102 to 108 V/A (decade increments) allows precise and reliable measurements within a very wide dynamic range from nanowatts up to 10 milliwatts optical power.
Many additional features like switchable low-pass filters, offset adjustment, switchable AC/DC coupling and the capability of manual and opto-isolated remote control by a PC make the OE-300 the most versatile wideband photoreceiver in its class.
Compatible with optical bench (free space), breadboard, cage systems and fibre optics
The Si-models are factory equipped with an optical free space input (FST) which is designed as a 1.035″-40 threaded flange with a screw-on coupler ring. It opens up a broad compatibility with optical accessories from various manufacturers, such as lenses, tubes, cage systems, optical adapters etc.
The free-space input can be converted into fibre connections (FC, FSMA) easily by simply screwing on the fibre adapter of the PRA series.
For the InGaAs models there is the choice between a fixed fibre input (FC) model allowing highly accurate fibre optic measurements and a model with free space input.
For models with detector areas smaller than Ø 0.4 mm, the use of fibre adapters is only recommended to a limited extent, since coupling losses and instabilities can occur. If the focus is on high-precision fibre optic measurements, using FC-models with fixed optical fibre input will usually give the best results.
All the OE-300 models can be easily mounted to standard M4 and 8-32 UNC threaded optical post holders via the optionally available post holder adapter type PRA-PAP.
Device holder is not included
Applications
- All purpose low-noise photoreceiver (O/E converter) for the MHz range
- Time resolved optical pulse and power measurements
- Laser intensity noise measurements (RIN)
- Optical front-end for oscilloscopes, spectrum analysers, A/D converters and RF lock-in amplifiers
English (UK)